PMS ST1500 polyol/cyclopentane storage and feeding system This system is used to storage and feed to the polyol/cyclopentane. Itis suitable in the continuous production pattern, may feed the foaming production line continues with the component material automatically. Main Technical Parameters: * Polyol/cyclopentane container unit,·effective volume: 1500L;· Material: carbon steel,· Working pressure max. 0.60Mpa;· With safety valve;· Agitator with mechanical sealing or no leaking magnetic coupling;· With pressure switch nitrogendecompressor,·non-return valve on the filling port;·magnetic liquid level meter: visual level with alarm sensors for· Heat exchanger: Pipe-type heat exchanger installed outside the tank.· Temperature probe,· Double walled structure, temperature insulation out of surface of the tank;* Double screw reciprocating /feeding pump·The flow capacity: 60L/min., ·Main motor power: 7.5kw * Water supply required: processed running water, flow capacity: 300L/min. Brings R1the ball valve; *The nitrogen gas supply required (if needs): 0.7 Mpa, flow capacity:600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ballvalve; * Power supply required: 3× 380V/50HZ±10% or as customer's local condition * Control voltage: AC110V/DC24V; Explosion-proof measures on the machine: * Enclosure and gas-exhausting system for the units of polyol /cyclopentane; * The flammable gas detecting and monitoring system; * Nitrogen gas pressurization for the container; * Ex type of the motors, valves and relevant electric elements; * Grounding; * Leakage monitoring and control;